Motorized water shut-off valve

Motorized ball valve MBV110

A motorized ball valve designed for direct installation in the plumbing network, providing fast, automatic water shut-off as soon as a leak is detected.

Product

Motorized ball valve MBV110 overview

The MBV110 is a motorized ball valve designed for direct installation in the plumbing network. It is available in 1/2 in., 3/4 in. and 1 in. diameters. Connected to a VC100 controller, it closes the water supply in about 4 seconds when a connected Assek sensor detects a leak, before a minor water leak becomes a loss.

Integrated with the Assek ecosystem, it is triggered automatically by alerts received in the Oblik platform.

Benefits

Key advantages of the MBV110

The MBV110 combines fast closing, construction designed for demanding environments and accessible manual control to protect the water supply.

Fast shut-off

Closes the water supply in under 4 seconds as soon as a connected Assek sensor triggers the action.

Robust construction

304 stainless-steel valve body, PTFE seat, IP67 protection rating and a valve body certified for potable-water applications.

Integrated manual control

The manual wheel and visual position indicator enable a fast intervention without specialized tools.

Features

MBV110 features and specifications

Controlled by the VC100, the MBV110 helps teams shut off water quickly when a leak is detected while making installation and maintenance easier.

Automatic shut-off and position confirmation

Automatically shuts off the water supply in under 4 seconds when a connected Assek sensor is triggered. The open or closed position is confirmed at end of travel and shown visually.

Simplified installation and maintenance

Compatible with 1/2 in., 3/4 in. and 1 in. plumbing. The tool-free quick connector between the actuator and valve body makes replacement easier.

Designed for humid environments

Its 304 stainless-steel body, PTFE seat and IP67 protection rating make it suited to mechanical rooms and humid environments.

Manual control and backup power

The integrated wheel enables manual operation and automatically returns to controlled mode. The valve is operated by the VC100 controller, with battery backup power.

MBV110 technical specifications

Model: MBV110 – Motorized ball valve

Compatible diameters: 1/2 in., 3/4 in., 1 in.

Materials: 304 stainless-steel valve body, nickel-plated brass stem, 304 stainless-steel ball, PTFE seat, PC-ABS actuator housing (black)

Power supply: 9 to 24 VDC – maximum consumption of 5 W

Actuation torque and speed: 2.5 Nm torque – closes/opens in about 4 seconds

Maximum pressure: 150 PSI (10 bar)

Fluid temperature: 2 to 90 °C

Operating temperature: -20 to 45 °C – humidity ≤ 95% non-condensing

Protection rating: IP67

Valve body compliance: CSA B125.3, NSF/ANSI/CAN 61 and NSF/ANSI 372

Warranty: 5 years (valve body), 2 years (actuator), both limited

Installation

How to install the MBV110

Installation must be carried out by a qualified professional in accordance with local codes.

Preparation

Shut off the main water supply, drain the line to remove residual pressure and clean the pipes before installation. Remove the actuator from the valve body to make threading easier.

Valve installation

Position the valve downstream of the main manual valve, as close as possible, while leaving access space for maintenance. Vertical installation is recommended, or up to a 90° angle. Use high-density PTFE tape followed by a potable-water-compatible thread sealant, without excessive tightening force.

Reassemble the actuator

Align the actuator with the valve, lower it while confirming engagement with the drive shaft, then insert the locking pin.

Commissioning

Open the water supply slowly and check the connections for leaks. Connect the control cable to the VC100 controller and test the opening and closing functions.

Motorized ball valve MBV110 FAQ

About 4 seconds, once it receives the shut-off signal from the VC100 controller.

Yes. An integrated manual wheel enables manual operation by lifting and turning the wheel in the desired direction. Push it down to return to automatic control mode.

Yes. The VC100 controller connected to the MBV110 operates with 12 V power and a backup battery to continue protecting the building in the event of a power outage.